11262023: Tucker University Freshman Year 1-701 Corner Pop




  Note:  if you do not do prep-work, bring all your past tools to class to create units needed.


Stop throwing away half of those squares you used to pop off a corner and start saving your fabric by using the Corner Pop.  Before you know it, you will be popping off the corners of every unit.  the Corner Pop does just that, it helps to add a pop of color to any unit and can add a secondary pattern to your quilt.

* Required tools: Corner Pop and Quilter's Magic Wand
*Required Technique Sheet:  none
*Required Design Sheet:  Corner Pop
NOTE:  the design sheet will be available for purchase on class days

* These items can be purchased at Quilter's Cottage

Please bring all supplies on list to have a successful class!

Basic Sewing Supplies:
Sewing Machine in good working condition, bring power cords and manual
Thread neutral
Machine needles - replace with a new one prior to class
Snips or trimming scissors
Seam ripper
Flower head pins and pincushion

Basic Quilting Supplies:
Rotary cutter with a sharp blade
Marking Pencil - I recommend the Sewline mechanical pencil or the micron pigma marker  size .01
Small cutting mat
Straight edge ruler approx. 6" x 12" - I really recommend the 8 1/2" x 24 as you will be cutting WOF 
Invisigrip
Best Press or light starch

If you wish to do your pre-class prep work it would help, if you do not understand wait until class day but have units cut and as much prep-work done as you can.  This will help.  If not doing pre-work bring all your past tools with you to this class!

Fabric Requirements:
Fabrics will be cut during class.  Therefore, the fabric requirements are healthy amounts so that you can make your own design choices during class.

For course 1-701, we recommend the following yardage:

fabric requirements:
Approximately (3) strips of fabric that measure no less than 3 1/4".  For best results, these strips should read as a solid and be in strong contrast to your Pre-class units as specified below, can be all the same or 3 different fabrics your choice. 

Pre-class contruction of units, these are all constructed using your design sheets and make just like you did in class or bring all your units previously made - 4” finished (4 1/2” cut size):

(4) 4 1/2" squares of fabric
(4) 4 1/2” (cut size) half square triangles
(4) flying goose the (cut size) would be 4 1/2" x 2 1/2" 
(4) 4 1/2" (cut size) quarter square triangle units
(4) 4 1/2" (cut size) V Blocks units
(4) 4 1/2" Corner Beam units
8” Lemoyne Star

*Unit that can be constructed using a Studio 180 Design tool.
Cost: $ 25.00
Date(s):
Skill Level:intermediate
Instructor Name:Cyn Wilde
Instructor Bio:Certified Instructor Studio 180
cynwilde@comcast.net
281-455-8267